EB3-TONE

CompactPCI® Express (PXI Express™) • Quad Port USB 3.0 SuperSpeed Controller

The EB3-TONE is a peripheral slot board for CompactPCI® Express (aka PXI Express™) systems, equipped with a quad port USB 3.0 compliant host controller. All four USB connectors are available from the front panel for attachment of USB devices. The EB3-TONE can be installed into any peripheral slot of a CompactPCI® Express or PXI Express™ backplane. The front panel USB 3.0 host connectors can deliver up to 1.5A VBUS (+5V) each.

Downloads & Ressources

Documents

Drivers

WHQL

Specifications

General

PICMG® CompactPCI® Express standard (EXP.0) peripheral slot card type 1 or type 2
PXI Express™ peripheral slot card
Single Size Eurocard 3U 4HP 100x160mm²
Backplane connectors XJ3, XJ4 (type 2 peripheral slot)
CompactPCI® Express backplane connector XP1 (+12V power) optional (type 1 peripheral slot)
CompactPCI® Express backplane connector XJ4 with F2 key for CompactPCI® Express & PXI Express™ systems (F1 key available on request)
PCIe x 1 upstream – Gen2 (5.0Gbps) required for optimum performance

USB Interfaces

Texas Instruments PCI Express® to quad-port USB 3.0 controller
PCI Express® x 1 Gen2 interface for optimum performance
USB 3.0 xHCI (eXtensible host controller interface) SuperSpeed supported
USB 2.0 high-speed, full-speed, low-speed supported
4 x front panel Type A USB 3.0 host connectors
V_BUS (+5V) 1.5A high current power switches assigned to front panel connectors (may require a backplane slot populated w. XJ1 power connector, dependent of the total external load via VBUS)

Environmental & Regulatory